Setting Up CloudPRNT with Your Star Printer

This guide will help you configure your Star printer to work with our CloudPRNT system for automatic order printing.

Step 1: Find Your Printer's IP Address

Option 1: Print Network Status

1. Turn on your Star printer
2. Hold down the FEED button for 3-5 seconds until the printer starts printing
3. The printer will print a network status page showing the IP address

Option 2: Check Your Router

• Log into your router's admin panel and look for connected devices
• Look for a device named with your printer model

Step 2: Access Your Printer's Web Interface

1. Open a web browser on a device connected to the same network
2. Go to http://[printer-ip-address] (replace with your actual IP address)
3. Log in to the printer's admin interface

• Default credentials are usually printed on the printer or in the manual
• Common defaults: admin/admin or root/cloudline

Step 3: Configure CloudPRNT Settings

1. Navigate to CloudPRNT or Cloud Services in the printer menu
2. Configure the following settings:

• CloudPRNT Service: Set to ENABLE
• Server URL: Enter the server URL from your Cloudline printer queue
• Password: Enter the password from your Cloudline printer queue
• User Name: Enter cloudline
• Polling Time: Set to 2 seconds (recommended)

3. Click Submit
4. Click Save & Restart to apply changes

Step 4: Test Your Setup

1. Create a test order using your Cloudline visitor app
2. Accept the order in your system
3. Your printer should automatically print the order within 2-5 seconds

Updated on: 25/09/2025